TL AWD V6-3.7L (2010)
Humidity Sensor: Service and Repair
Humidity/In-car Temperature Sensor Replacement
1. Remove these items:
-
Driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver's
Dashboard Undercover Removal/Installation
-
Remote slot (with keyless access) See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Service and
Repair/Keyless Access Remote Slot Test/Replacement (With Keyless Access System)
2. Disconnect the air hose from the heater unit See: Heating and Air Conditioning/Air Door/Air Door Actuator / Motor/Service and Repair/Driver's
Air Mix Control Motor Replacement. Keep grip on air hose while doing following procedures to assist in removal of sensor.
3. Disconnect the connector (A) from the humidity/in-car temperature sensor (B).
4. Unhook the left lock tab (A) of the humidity/in-car temperature sensor by pushing your thumb (B) between the sensor and tab (C).