TL AWD V6-3.7L (2010)
7. Remove the back-up light switch (A). Check for continuity between back-up light switch 2P connector terminals No. 1 and No. 2. There should be
continuity when the actuator (B) is pressed, and no continuity when the actuator is released.
-
If the test result is OK, check the reverse shift mechanism in the transmission.
-
If the test result is not OK, replace the back-up light switch.
8. Apply liquid gasket (P/N 08717-0004, 08718-0001, 08718-0012, 08718-0003, or P/N 08718-0009) to the threads of the back-up light switch, and
install it on the transmission housing.
