TL AWD V6-3.7L (2010)
9. Disconnect the cable reel subharness 20P connector (A).
10. Check for continuity between terminal (T9) and cable reel subharness 20P connector terminal No. 12. There should be continuity.
-
If there is continuity, go to step 11
-
If there is no continuity.
-
An open in the wire, replace the cable reel subharness.
-
Poor terminal (T9).
11. Check for continuity between cable reel subharness 20P connector terminal No. 11 and horn switch positive terminal 1P. There should be
continuity.
-
If there is continuity, check or adjust the installation of the driver's airbag assembly and the horn switch plate or replace the driver's airbag
assembly.
-
If there is no continuity, repair open in the wire, or replace the cable reel subharness.
