TL AWD V6-3.7L (2010)
8. Disconnect the transfer tube (C), and remove the fuel tank unit.
Installation (with SH-AWD)
1. Temporarily attach a new base gasket (A) to the fuel tank unit (B), position the mark of the transfer tube (C) up, connect the transfer tube (D), then
insert the fuel tank unit partially into the fuel tank.
NOTE:
-
Be careful not to damage the new base gasket.
-
Make sure the clamp (E) is positioned as shown.
-
Be careful not to bend the fuel gauge sending unit.
-
Do not coat the base gasket with oil.