TL AWD V6-3.7L (2010)
Battery: Removal and Replacement
Battery Removal and Installation
NOTE: The battery terminal disconnection and reconnection procedure See: Procedures must be done before and after doing this procedure. Some
systems store data in the memory that is lost when the battery is disconnected.
Removal
1. Do the battery terminal disconnection procedure See: Procedures.
2. Remove the three clips and air intake duct splash separator (A).
3. Remove the two nuts (B) securing the battery setting plate (C), then remove the battery setting plate and the battery (D).
Installation
1. Install the battery (A), then install the battery setting plate (B).
