TL AWD V6-3.7L (2010)
-
If there is battery voltage, go to step 8.
-
If there is no voltage, check for:
-
A blown No. 23 (15 A) fuse in the driver's under-dash fuse/relay box.
-
A faulty front accessory power socket relay.
-
A faulty faulty driver's under-dash fuse/relay box.
-
An open in the wire between front accessory power socket terminal No. 1 and driver's under-dash fuse/relay box connector P (20P) terminal
No. 1.
8. Check for continuity between front accessory power socket 2P connector terminal No. 2 and body ground. There should be continuity.
-
If there is continuity, replace the power socket; go to step 9.
-
If there is no continuity, check for:
-
Poor ground (G403).
-
An open or high resistance in the wire between front accessory power socket 2P connector terminal No. 2 and ground (G403).
9. Remove the screw and socket base (A), then remove the socket (B).
10. Remove the housing (A) from the socket base (B).
11. Install the power socket in the reverse order of removal.
