TL AWD V6-3.7L (2010)
Relay Box: Service and Repair
Drivers Under-Dash Fuse/Relay Box (Drivers MICU) Removal and Installation
Driver's Under-dash Fuse/Relay Box (Driver's MICU) Removal and Installation
Special Tools Required
-
Relay Puller 07AAC-000A1A0
NOTE: SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repairs or servicing.
Removal
1. Do the battery terminal disconnection procedure See: Battery/Service and Repair/Procedures.
2. Remove these items:
-
Driver's dashboard trim See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver's Dashboard
Trim Removal/Installation
-
Driver's switch panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Dashboard Driver's
Switch Panel Removal/Installation
-
Driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver's
Dashboard Undercover Removal/Installation
-
Driver's kick panel See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair
3. Loosen the bolt (A), then remove the bolt (B) and the bracket (C) from dashboard/steering hanger beam.
4. USA models with keyless access system and Canada models without keyless access system: Remove the screws and cover (A) from the driver's
under-dash fuse/relay box.