TL AWD V6-3.7L (2010)
Clutch Switch: Testing and Inspection
Clutch Pedal Position Switch A Test
Clutch Pedal Position Switch A Test
M/T model
1. Disconnect the clutch pedal position switch A connector (A).
2. Remove the clutch pedal position switch A (B).
3. Check for continuity between the terminals according to the table.
-
If the continuity is not as specified, replace the clutch pedal position switch A See: Service and Repair/Clutch Pedal Position Switch A
Replacement.
-
If OK, install the clutch pedal position switch A and adjust the pedal height See: Adjustments.
