TL AWD V6-3.7L (2010)
2. A/T model: Install the upper radiator hose bracket (B) and the dipstick (C).
3. Connect the positive starter cable (D) and the S terminal connector (E). Make sure the crimped side of the ring terminal faces away from the
starter when you connect it.
4. Install the harness clamp (F).
5. Install the air intake duct splash separator See: Engine, Cooling and Exhaust/Engine/Service and Repair/Engine Installation.
6. Install the battery base See: Engine, Cooling and Exhaust/Engine/Service and Repair/Engine Installation.
7. Do the battery installation procedure See: Battery/Service and Repair/Removal and Replacement.
8. Start the engine to make sure the starter works properly.
9. Install the engine compartment covers See: Body and Frame/Access Cover/Service and Repair.