TL AWD V6-3.7L (2010)
Steering Column Cover: Service and Repair
Steering Column Cover Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the dashboard or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Do not pry the column cover surface with any tools.
1. Remove the instrument fascia See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Fascia
Removal/Installation.
2. Turn the steering wheel to access the mounting screws, then remove the screws from front side of the column cover (A).
3. Insert a flat-tip of a small screwdriver or similar tool into the holes (A) in the lower column cover (B). Gently push to release the hooks (C), and
pull up the upper column cover (D) to remove it.
