TL AWD V6-3.7L (2010)
5. Press the wheel bearing (A) out of the knuckle (B) using the attachment, the driver handle, and a press.
6. Wash the knuckle and the hub thoroughly in high flash point solvent before reassembly.
7. Press a new wheel bearing (A) into the knuckle (B) using the old bearing (C), a steel plate (D), the attachment, the support base, and a press.
NOTE:
-
Install the wheel bearing with the wheel speed sensor magnetic encoder (E) (brown color), toward the inside of the knuckle.
-
Remove any oil, grease, dust, metal debris, and other foreign material from the magnetic encoder surface.
-
Keep any magnetic tools away from the magnetic encoder surface.
-
Be careful not to damage the magnetic encoder surface when you insert the wheel bearing.