TL AWD V6-3.7L (2010)
2. Install all the parts except the damper mounting washer (Without SH-AWD) and the self-locking nut onto the damper unit by referring to the
Exploded View.
3. Compress the damper spring using a strut spring compressor. Do not compress the spring excessively.
4. Align the lower end (A) of the damper spring with the stepped part (B) of the dust cover lower mount and the lower spring seat on the damper unit.
5. Position the tab (A) on the spring mounting cushion facing forward but toward the inside of the vehicle.
