TL AWD V6-3.7L (2010)
Suspension Strut / Shock Absorber: Removal and Replacement
Front Damper/Spring Removal and Installation
Front Damper/Spring Removal and Installation
Removal
1. Raise and support the vehicle See: Wheels and Tires/Vehicle Lifting/Service and Repair.
2. Remove the front wheel.
3. Remove the wheel speed sensor harness bracket mounting bolt (A).
4. Remove the damper pinch bolt (A) and the damper fork mounting nut (B) while holding the mounting bolt (C), then remove the damper fork (D)
from the damper and the lower arm.
5. Remove the front strut brace mounting nuts (A).