TL AWD V6-3.7L (2010)
6. Remove the valve stem nut (A) and the washer (B), then remove the tire pressure sensor with the valve stem (C) from the wheel.
NOTE: Check the nut and the washer, if they have deterioration or damage, replace them with new ones during reassembly.
7. Remove and replace the valve stem grommet (A) from the tire pressure sensor (B).
NOTE:
-
The valve stem grommet might stay in the wheel; make sure you remove it.
-
Always use a new valve stem grommet whenever the tire pressure sensor has been removed from the wheel, or when replacing the tire.
