TL AWD V6-3.7L (2010)
7. Check the height (A) of the 8 x 53 mm ATF joint pipe (B) between the top (C) of the pipe and the solenoid valve body mounting surface (D). The
height is about 7.0 mm (0.28 in). If the height is over 7.0 mm (0.28 in), push the pipe until it bottoms in the accumulator body.
8. Install a new gasket (A) on the transmission housing, and install the 8 x 36 mm ATF joint pipe (B) with the filter end into the transmission housing
and the 8 x 25.2 mm ATF pipe (D).
