TL AWD V6-3.7L (2010)
8. Measure the A/T clutch pressure control solenoid valve C resistance at the connector terminals.
-
If the resistance is out of standard, replace A/T clutch pressure control solenoid valve C See: Service and Repair/A/T Clutch Pressure Control
Solenoid Valve C Replacement.
-
If the resistance is within the standard, go to step 9.
9. Connect a jumper wire from the negative battery terminal to A/T clutch pressure control solenoid valve C connector terminal No. 2, and connect
another jumper wire from the positive battery terminal to connector terminal No. 1.
-
If a clicking sound is heard, the valve is OK, and the test is complete, go to step 20.
-
If no clicking sound is heard, go to step 10.
10. Remove A/T clutch pressure control solenoid valve C, the ATF feed pipes (A), the O-rings (B), the ATF pipe (D), and the gasket (E).