TL AWD V6-3.7L (2010)
-
Transmission damage.
-
Vehicle does not move in any gear.
-
Vehicle accelerates poorly, and flares when starting off in D and R.
-
The engine vibrates at idle.
7. If the ATF level is above the upper mark, drain the ATF to the proper level See: Service and Repair/Removal and Replacement/ATF Replacement
.
NOTE: If the vehicle is driven when the ATF level is above the upper mark, the vehicle may creep forward while in N, or have shifting problems.
8. If necessary, fill the transmission with the ATF through the filler hole (A) to bring the fluid level between the upper mark and the lower mark of
the dipstick. Do not fill past the upper mark. Always use Acura ATF-Z1 Automatic Transmission Fluid (ATF). Using a non-Acura ATF can affect
shift quality.
9. Insert the dipstick back into the dipstick guide tube.