TL AWD V6-3.7L (2010)
Fluid Line/Hose: Service and Repair
ATF Cooler Hose Replacement
Exploded View
NOTE: When installing the hose clamps, make sure they do not interfere with the surrounding parts.
1. Install the ATF cooler hoses over the ATF cooler lines with the clips at the appropriate points in reference to the following list. Align the paint
marks (I) to the driver's side, and the white paint marks (J) to the passenger's side.
2. Secure the ATF cooler hose with the clamps (K) at the white paint line (L), then align the ATF cooler hose clamps (M) to the white paint line (N)
in the direction shown.
3. Refill the transmission with ATF to the proper level See: Service and Repair/Removal and Replacement/ATF Replacement.
