TL AWD V6-3.7L (2010)
Shift Interlock Switch: Service and Repair
Park Pin Switch Replacement
NOTE: The park pin switch, and the shift lock solenoid harness are not available separately. Replace the park pin switch, and the shift lock solenoid
harness as a set.
1. Remove the shift lock solenoid See: Actuators and Solenoids - A/T/Shift Interlock Solenoid/Service and Repair.
2. Remove the harness wire ties (A), and remove the park pin switch (B).
3. Replace the park pin switch.
4. Install the park pin switch, and secure the park pin switch with a new screw (C).
5. Connect the shift lock solenoid connector to the shift lock solenoid. Then install the shift lock solenoid See: Actuators and Solenoids - A/T/Shift
Interlock Solenoid/Service and Repair.
6. Route the harnesses as shown. Take the slack out of the harnesses, and secure the harnesses with the harness wire ties (A).
