TL AWD V6-3.7L (2010)
Shifter A/T: Overhaul
A/T Shift Lever Knob Replacement
A/T Shift Lever Knob Replacement
NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands
or gloves.
1. Grasp the shift lever boot ring, and slip it out of the shift lever knob.
2. Wrap the end of a flat-tip screwdriver with tape, pry the shift lever knob cover locks (A), and remove the shift lever knob cover (B).
3. Remove the screws (C), and remove the shift lever knob (D).
4. Apply silicone grease to the top (E) of the shift lever rod.
5. Install a new shift lever knob on the shift lever, and secure it with new screws.
