TL AWD V6-3.7L (2010)
Transmission Mount: Service and Repair
Upper Transmission Mount Removal and Installation (A/T)
Upper Transmission Mount Removal and Installation
Removal-A/T model
1. Remove the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
2. Remove the engine compartment covers See: Body and Frame/Access Cover/Service and Repair.
3. Remove the air cleaner assembly See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair.
4. Lift and support the engine with a jack and a wood block under the transmission.
5. Remove the harness clamp (A), then remove the upper transmission mount bracket mounting bolts and nut.
NOTE: Do not remove the bolt (B) from the upper transmission mount. If the bolt is removed, the upper transmission mount must be replaced as an
assembly.
6. Remove the upper transmission mount.
Installation-A/T model
1. Install the upper transmission mount.