TL AWD V6-3.7L (2010)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder Replacement
NOTE:
-
Use fender covers to avoid damaging painted surfaces.
-
Do not spill brake fluid on the vehicle; it may damage the paint or plastic. If brake fluid does contact the paint or plastic, wash it off immediately
with water.
1. Remove and discard the brake fluid from the clutch master cylinder reservoir with a syringe or other suitable device.
2. Remove the clutch reservoir (A).
3. Disconnect the clutch line (A) from the clutch master cylinder (B). To prevent spills, cover the line joint with rags or shop towels.
NOTE: Loosen the flare nut (C) while holding the clutch line connector (D) using a wrench.
4. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and