TL AWD V6-3.7L (2010)
Hydraulic Hose: Service and Repair
Clutch Hose Replacement
NOTE:
-
Replace the clutch hose it is twisted, cracked, or leaks.
-
Use fender covers to avoid damaging painted surfaces.
-
Do not spill brake fluid on the vehicle; it may damage the paint or plastic; if brake fluid does contact the paint or plastic, wash it off immediately
with water.
1. Remove the air intake duct splash separator (A).
2. Do the battery removal procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
3. Remove the battery base (A).
4. Disconnect the clutch hose (A) from the clutch lines (B).