TL AWD V6-3.7L (2010)
Drive/Propeller Shaft: Testing and Inspection
Propeller Shaft Inspection
Universal Joint and Boots
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Shift the transmission to neutral (M/T model) or N (A/T model).
3. Check the No. 1 center support bearing (A) and the No. 2 center support bearing (B) for excessive play or noise. If the center support has
excessive play or noise, replace the propeller shaft assembly.
4. Check the rubber portions (C) of the center support bearings for damage and deterioration. If the rubber portions are damaged or deteriorated,
replace the propeller shaft assembly.
5. Check the universal joints for excessive play or noise. If the universal joints have excessive play or noise, replace the propeller shaft assembly.
Propeller Shaft Runout
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Shift the transmission to neutral (M/T model) or N (A/T model).
3. Install a dial indicator with its needle on the middle of the No. 1, No. 2, or No. 3 propeller shaft.