TL AWD V6-3.7L (2010)
8. Remove the inboard boot. Be careful not to damage the boot.
9. Remove the vinyl tape.
Outboard Joint Side
1. Remove the boot bands. Be careful not to damage the boot.
-
If the boot band is a low profile type (A), pinch the boot band using commercially available boot band pliers (B).
-
If the boot band is an ear clamp type (C), lift up the three tabs (D) using a screwdriver.
2. Slide the outboard boot (A) partially toward the inboard joint side. Be careful not to damage the boot.
