TL AWD V6-3.7L (2010)
7. Remove the wheel speed sensor (A) from the knuckle. Do not disconnect the wheel speed sensor connector.
8. Remove the brake hose bracket mounting nuts (A), then disconnect the brake hose bracket (B) from the knuckle.
NOTE: Use the new mounting nuts during reassembly.
9. Remove the damper lower mounting bolt (C).
NOTE: Use a new mounting bolt during reassembly.
10. Remove the control arm mounting self-locking nut (A) and the washer (B).
NOTE: Use a new self-locking nut during reassembly.
