TL AWD V6-3.7L (2010)
8. Refill the MTF from the filler plug hole on the transmission, until the MTF overflows from the fluid check bolt hole (A). Always use Acura
Manual Transmission Fluid (MTF).
Fluid Capacity:
9. Raise the vehicle on a lift.
10. After the fluid stops overflowing, install the fluid check bolt (B) with a new sealing washer (C).
11. Install the front splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
12. Lower the vehicle on the lift.
13. Install the filler plug (A) with a new sealing washer (B).