TL AWD V6-3.7L (2010)
23. Install the harness cover on its bracket, and secure it with the bolt.
24. Check the connectors for rust, dirt, or oil, and clean or repair if necessary, then connect the connectors securely.
25. Apply molybdenum grease to the hole in the bushing in the shift cable end. Attach the shift cable end to the selector control lever, then insert the
control pin into the selector control lever hole through the shift cable end, and secure the control pin with the spring clip.
26. Secure the shift cable bracket with the nuts.
27. Install the battery base See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Installation.
28. Install the air cleaner housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service
and Repair.
29. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.