TL AWD V6-3.7L (2010)
16. Remove the bolts (C), and loosen the bolt (D). Release the hook (E), then remove the regulator through the hole in the door.
17. Apply multipurpose grease to all the sliding surfaces of the regulator (A) where shown.
18. Install the glass and the regulator in the reverse order of removal, and note these items:
-
If the clip is damaged or stress-whitened, replace it with a new one.
-
Push the hooks into place securely.
-
Make sure the connectors are plugged in properly.
-
Make sure that there is no clearance between the glass and the glass run channel when the glass is closed.
-
Roll the glass up and down to make sure it moves freely without binding.
-
Adjust the position of the glass as necessary See: Window Glass/Front Door Window Glass/Adjustments.
