TL AWD V6-3.7L (2010)
Windshield Washer Reservoir: Service and Repair
Washer Reservoir Replacement
1. Remove the right front inner fender See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Inner Fender
Replacement.
2. Disconnect the 2P connector(s) (A) from the windshield washer motor (B), washer fluid level switch (Canada models), and the headlight washer
motor (Canada models with SH-AWD).
3. Disconnect the washer tube(s), then if necessary, remove the washer motor, the washer fluid level switch (C) (Canada models), and the headlight
washer motor (D) (Canada models with SH-AWD).
NOTE: Fluid may flow out of the opening.
4. Remove the clip (A) and three bolts from the washer reservoir (B).