TL AWD V6-3.7L (2010)
Wiper Arm: Adjustments
Wiper Arm/Nozzle Adjustment
1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, then turn the wiper switch ON, and then back OFF.
2. When the wiper arms stop at the park position, make sure that they are at the correct position.
3. When you turn on the washer(s), make sure 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the
standard positions, adjust the nozzle(s).