TL FWD V6-3.5L (2009)
Rear Bumper: Service and Repair
Rear Bumper Removal/Installation
Rear Bumper Removal/Installation
NOTE:
-
Put on gloves to protect your hands.
-
Have an assistant help you when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper or the body.
1. Remove the screws (A, B) and the clips (C) securing the rear bumper (D).
2. Pull on the rear bumper (A) at the wheel arch areas to release it from the hooks (nine places) (B) on the side spacer (C).
3. With the help of an assistant, pull out one side of the rear bumper (A) to release the hooks (B) on the rear spacer (C) as shown. Repeat this step on
the opposite side.