TL FWD V6-3.5L (2009)
-2 Passenger's door: Detach the harness clip (D), then disconnect the power window switch connector (E) and the courtesy light connector (F).
NOTE: If you are only removing the door panel, go to step 14. If you are doing further disassembly of the door panel, continue to step 10.
Driver's door
Passenger's door
Inner handle removal
10. Disconnect the inner handle cable (A) and the latch cable (B) from the inner handle (C), then remove the handle.
-1 Detach the inner handle cable fasteners (D, E), then disconnect the inner handle cable from the cable fasteners.
Detach the latch cable fastener (F), and remove the latch cable fastener (G) from the inner handle by pinching its tabs together.
-2 NOTE: If the cable fasteners are damaged or stress-whitened, replace them with new ones.
Door end trim removal
11. Remove the screw (A), and detach the clips (B), then remove the door end trim (C) by pulling back the trim. The clips (D) will stay in the door.
NOTE:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Install the clips on the door end trim before installing the trim on the door.
