acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Rear Door Striker > < Rear Door Pad Replacement|Page 7426
Page 1
background image

Rear Door Panel: Service and Repair
Rear Door Sash Inner Trim Replacement

Rear Door Sash Inner Trim Replacement

NOTE: Take care not to scratch the door.

1. Remove these items:

-

Door panel  See: Rear Door Panel Removal/Installation

-

Door end trim  See: Rear Door Panel Removal/Installation

2. Remove the rear door sash inner trim (A).

-1 Detach the clips.
-2 Pull back along the outside edge of the trim to release the hook strip (B) from the door glass opening flange at the B-pillar portion of the door

sash.

-3 Pull back along the outside edge of the trim to release the hook strips (C) from the door glass opening flange at the roof portion and the quarter

glass portion of the door sash.

-4 If necessary, release the clip (D) from the door panel.

3. Install the trim in the reverse order of removal, and note these items:

-

If the clips are damaged or stress-whitened, replace them with new ones.

-

Push the hook strips and the clips into place securely.

Rear Door Striker > < Rear Door Pad Replacement|Page 7426