acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Rear Door Window Regulator|Service and Repair|Page 7442 > < Rear Door Window Glass Weatherstrip|Service and Repair|Page 7438
Page 1
background image

Rear Door Window Regulator: Service and Repair

Rear Door Glass and Regulator Replacement

NOTE: Put on gloves to protect your hands.

1. Remove the door panel.  See: Rear Door Panel/Service and Repair/Rear Door Panel Removal/Installation

2. Raise the glass fully.

3. Remove the screws, then remove the door panel bracket (A).

4. Disconnect the power door lock actuator connector (A), and detach the harness clip (B). Remove the plug caps (C).

5. Pass the wire harness (D) through the slits (E) in the plastic cover (F), then remove the plastic cover.

NOTE: If the plastic cover is damaged or torn, replace it.

6. Detach the harness clip (A). Remove the bolts, and release the hook (B), then remove the door panel bracket (C).

7. Remove the door pad.  See: Rear Door Panel/Service and Repair/Rear Door Pad Replacement

Rear Door Window Regulator|Service and Repair|Page 7442 > < Rear Door Window Glass Weatherstrip|Service and Repair|Page 7438