TL FWD V6-3.5L (2009)
Grille: Service and Repair
Lower Front Bumper Grille Replacement
Lower Front Bumper Grille Replacement
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Put on gloves to protect your hands.
-
Take care not to scratch the front bumper.
1. Remove the front bumper. See: Bumper/Front Bumper/Service and Repair
2. If equipped, remove the headlight washer tube, as needed. See: Wiper and Washer Systems/Windshield Washer Hose/Service and Repair
3. Remove the screws from back of the front bumper (A), and release the hooks (B, C, D), then remove the lower front bumper grille (E) and the fog
light housing (F).
4. Install the grille in the reverse order of removal, and push the hooks into place securely.