TL FWD V6-3.5L (2009)
Scuff Plate: Service and Repair
Interior Trim Removal/Installation - Front Door Sill Area
Interior Trim Removal/Installation - Front Door Sill Area
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.
Front Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Detach the hooks (A) from the kick panel (B) and the B-pillar lower trim (C), and pull the front door sill trim (D) up by hand to detach the clips
(E), then remove it.
2. If necessary, pull the front side outer trim (F) up to detach the clips (G), then remove the trim.
3. Remove the driver's kick panel (A) or the passenger's kick panel (B).
-1 Pull out the door opening seal (C) as needed from the kick panel hooks (D).
-2 Pull the kick panel back by hand to detach the clips, then remove it.
4. Remove the B-pillar lower trim. See: Trim Panel/Service and Repair/Interior Trim Removal/Installation - B-Pillar Upper/Lower Trim
Driver's side
