TL FWD V6-3.5L (2009)
8. If the holder grommet is damaged or stress-whitened, replace it with a new one.
9. Install the holder (A) in the holder grommet (B) by turning it 45 ° clockwise, and install them in the body as an assembly by pushing it until the
hooks (C) snap into place securely.
10. Connect the vanity mirror light connector (A), and install the sunvisor (B) by inserting the bracket (C) and the pin (D) of the bracket cover (E) into
the holes in the body.
11. While holding the bracket cover (A), rotate the sunvisor (B) forward until the hook (C) snaps into place. Gently pull down on the sunvisor to make
sure it is properly secured in the body. Rotate the sunvisor into the holder (D).