TL FWD V6-3.5L (2009)
4.
Grasp the upper center of the carriage with your pliers, and gently pull the carriage until it slides towards you.
5.
Check the operation of the keyless access remote slot:
^
Insert the keyless access remote into its slot.
^
With your foot off the brake pedal, press the ENGINE START/STOP button once; this puts the vehicle in ACCESSORY mode. The keyless
access slot will click, locking the remote in place. The remote should not be removable.
^
With your foot still off the brake pedal, press the ENGINE START/STOP button twice; this puts the vehicle in LOCK (off) mode. The keyless
access slot will click again, unlocking the remote.
^
Pull the remote out of its slot.
6.
Exit the vehicle, and make sure the Lock, Unlock, and Trunk buttons on the remote work correctly.
Disclaimer