TL FWD V6-3.5L (2009)
10. Inspect the connector and the socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 11.
11. With the connectors still disconnected, do these input tests at the following connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 12.
12. Reconnect the connectors to the power control unit, and do these input tests at the following connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 13.
