TL FWD V6-3.5L (2009)
7. Separate the seat-back cover/pads (A) and the seat-back frame (B).
8. Pull back the edge of the seat-back cover all the way around, and release the upholstery rings (A) and Velcro fasteners (B), then remove the
seat-back cover (C)
9. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the upholstery
rings and the hook strips.
-
Replace all of the upholstery rings (A) fastening the seat-back cover (B) to the pad wires (C) with new ones using commercially available
upholstery ring pliers (D).
