TL FWD V6-3.5L (2009)
Active Spoiler Switch: Service and Repair
Trunk Lid Spoiler Switch Test/Replacement
1. Open the trunk lid, and remove the trunk lid spoiler. See: Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair
2. Disconnect the 2P connector (A) from the rearview harness (B).
3. Remove the three screws, and the trunk lid spoiler switch (C).
4. Check for continuity between terminals No. 1 and No. 2.
-
With the switch pushed, there should be continuity.
-
With the switch released, there should be no continuity.
5. If the continuity is not as specified, replace the switch.
6. Install the switch in the reverse order of removal.
