TL FWD V6-3.5L (2009)
Splash Guard: Service and Repair
Front Splash Shield Replacement
Front Splash Shield Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body.
1. Remove the front splash shield (A).
-1 Remove the clips (B, C) that secure the front splash shield to the body.
Remove the clips (D) that secure the front inner fender (E) and the front splash shield to the body.
-3 From under the front bumper (F), remove the bolts (G) that secure the front bumper, and the front splash shield to the body.
NOTE: To replace the clips, pry up on the center pin up at the notch (H).
2. Install the splash shield in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
