TL FWD V6-3.5L (2009)
8. Attach new double-sided adhesive tape to the edge of the trunk lid spoiler (F) as shown.
9. Fold the edge of each adhesive backing from the double-sided adhesive tape.
10. Hold the spoiler up, and fit the clips into the hole in the trunk lid, then push on the spoiler until the clips snap into place securely.
11. Carefully pull the adhesive backing away, and push on the double-sided adhesive tape portions to make adhesive stick securely.
12. Reconnect the trunk release switch connector, and reinstall the nuts.