TL FWD V6-3.5L (2009)
2. Install the VSA modulator-control unit (A) with the bracket (B) to the body, then install the wire harness clips (C) and the VSA modulator-control
unit bracket mounting bolts (D).
3. Align the connecting surface of the VSA modulator-control unit 47P connector (A) to the VSA modulator-control unit.
4. Pull down the lever (B) of the VSA modulator-control unit 47P connector, then confirm the connector is fully seated.
5. Connect the 10 mm brake lines and the 12 mm brake lines to the VSA modulator-control unit (A).
NOTE: Brake lines are connected to the master cylinder (B), the left-front (C), the right-front (D), the left-rear (E), and the right-rear (F) brake
systems.
