TL FWD V6-3.5L (2009)
Parking Brake Shoe: Procedures
Parking Brake Shoe Lining Break-in
WARNING
Do this operation in a safe area.
NOTE:
-
Do the brake lining surface break-in when replacing shoes with new brake linings and/or new rear brake disc/drum.
-
Check the number of parking brake lever clicks. Adjust the parking brake before lining surface break-in. See: Adjustments
1. Park the vehicle on a firm, level surface.
2. Release the parking brake lever.
3. Drive the vehicle at 28 mph (45 km/h) and set cruise.
4. Pull the parking brake lever with 88 N (9 kgf, 20 lbf) (2 clicks) of force for 3 seconds.
5. Pull the parking brake lever with 167 N (17 kgf, 38 lbf) (5 clicks) of force for 12 seconds.
6. Check the parking brake lever adjustment. See: Adjustments
