TL FWD V6-3.5L (2009)
4. Install the A/C condenser fan shroud assembly (A), then install the coolant reservoir (B).
5. Raise the vehicle on the lift.
6. Connector the radiator fan motor connector (A), and install the harness clamps (B).
7. Tighten the A/C condenser fan shroud mounting bolts (A).
8. Connect the A/C condenser fan motor connector (B), and install the harness clamp (C).
9. Install the splash shield. See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement
10. Lower the vehicle on the lift.
11. Install the air intake duct splash separator. See: Engine/Service and Repair/Engine Installation
12. Install the battery base. See: Engine/Service and Repair/Engine Installation
13. Do the battery installation procedure. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
14. Install the engine compartment covers. See: Engine/Access Cover/Service and Repair