TL FWD V6-3.5L (2009)
VTEC Rocker Arms
7. Inspect the rocker arm piston (A). Slide them into the rocker arms. If they do not move smoothly, replace the rocker arm set.
NOTE:
-
Apply new engine oil to the rocker arm piston when reassembling.
-
When removing the rocker arm piston from the intake secondary rocker arm (B), carefully apply air pressure to the oil passage of the rocker
arm.
8. Reassemble the rocker arm assembly. See: Service and Repair/Overhaul
9. Install the rocker arm assembly. See: Cylinder Head Assembly/Service and Repair/Overhaul/Camshaft, Rocker Arm Assembly, Camshaft Seal,
and Pulley Installation