TL FWD V6-3.5L (2009)
16. Loosen the bearing cap bolts and the bearing cap side bolts in sequence 1/3 turn at a time; repeat the sequence until all bolts are loosened.
17. Remove the bearing cap bolts (A) and the bearing cap side bolts (B), then remove the bearing caps (C).
18. Lift the crankshaft (A) out of the engine block, being careful not to damage the journals and the crank pulse plate.
19. Remove the CKP pulse plate from the crankshaft. See: Powertrain Management/Computers and Control Systems/Crankshaft Position
Sensor/Service and Repair/CKP Pulse Plate Replacement
20. Reinstall the main caps and the bearings on the engine block in the proper order.
