TL FWD V6-3.5L (2009)
7. Connect the crankshaft position (CKP) sensor connector (A), then install the CKP sensor cover (B) and the bolt (C).
8. Install the rear warm up three way catalytic converter (rear WU-TWC) bracket.
9. If the engine is still in the vehicle, do the following steps.
10. Install exhaust pipe A using new gaskets and new self-locking nuts. See: Service and Repair/Engine Installation
11. Install the splash shield. See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement
12. Refill the engine with the recommended engine oil. See: Engine Oil/Service and Repair